USB-C PD3.1 with USB Billboard Device Controller
Features:
One USB Type-C port configured as DFP, UFP or DRP
Support presenting dead battery by ‘Rd’ on CC1/2
Built-in VCONN power switch
Built-in USB Billboard device
Support Constant Current (CC) control output mode
One I2C master/slave port with clock frequency up to 1MHz
In-System Programmable via Type-C CC receptacle (EDI-over-BMC) or EDI-over-I2C protocol
Built-in 8051 with 32KB embedded flash and 1KB SRAM
Power-On-Off-Reset (POFR)
ESD HBM 8KV for CC1/CC2 pins DP/DM pins and EDI_CLK/EDI_DAT pins
Package QFN-32, 5x5x0.85mm
Application:
Monitor, Power Bank, Alt mode video Accessory
產品分類CATEGORY
專為個人行動裝置應用而設計。我們提供完整且方便的開發工具和參考設計，可加快產品開發及量產時程。 ENE MCU 縮短您的產品上市時間
USB-C PD
|
產品系列
|
IO338
|
IO368
|
IO358
|
IO352
|
|---|---|---|---|---|
|
說明簡介
|
USB-C PD Controller
Features: One USB Type-C port configured as DFP, UFP or DRP Built-in precision current source as DFP for 3.0A/1.5A/Default USB power advertisement Support Dead Battery (if RD_EN# pin tied to GND) Built-in VCONN power switch with OVP, OCP and thermal shutdown Three voltage comparators for VBUS OVP and OCP detection Two I2C master/slave ports with clock frequency up to 1MHz In-System Programmable via EDI-over-I2C protocol module Built-in 8051 microprocessor with embedded flash ESD HBM 8KV for CC pins Package QFN-24, 4x4x0.75mm (to be confirmed) Application: Mobile Devices, Car Charger, AC Adaptor, Power Banks |
USB-C PD3.1 and Universal Fast Charging Controller
Features: One USB Type-C port configured as DFP, UFP or DRP with Universal Fast Charging Another One USB Type-A port with Universal Fast Charging Support USB PD 3.1 PPS and Fast Role Swap (FRS) as Initial Sink Support USB PD 3.1 EPR Compatible with QC4.0/QC3.0/QC2.0 & BC1.2 Compatible with universal fast charging include Apple 2.4A , MTK PE+2.0...etc Support Dead Battery Built-in VCONN power switch Built-in Low-side current monitor for USB over-current protection (OCP) Built-in 8-bit ADC with 12 channels Built-in 6-bit DAC x4 with 32KΩ output resistance Support Constant Current (CC) control output mode Built-in 8-bit DAC4 for the Constant Current control output setting Support 14-bit PWM channel x2 for DC-DC regulator voltage adjusting of the Type-A port Built-in 8051 with 32KB embedded flash and 1KB SRAM Power-On-Off-Reset (POFR) Support NTC thermistor for thermal alarm ESD HBM 8KV for CC1/CC2 pins DP/DM pins and EDI_CLK/EDI_DAT pins Operation current: 15mA (estimation) Package QFN-24, 4x4x0.75mm Application: AC/DC Charger, Power Bank, Alt mode video Accessory |
USB-C PD3.0 Dual-Port Controller
Features: Two USB Type-C DFP Controller Built-in Rp as DFP for 3.0A/1.5A/Default USB power advertisement Built-in Rd as UFP Built-in Vconn Switch (600mA) Support Dead Battery mode Four voltage comparators Two DACs Two I2C master/slave ports with clock frequency up to 1MHz In-System Programmable via EDI-over-I2C protocol module Built-in 8051 microprocessor with embedded flash Package QFN-24, 4x4x0.75mm Application: USB-C Accessory |