USB-C PD3.1 with USB Billboard Device Controller
Features:
One USB Type-C port configured as DFP, UFP or DRP
Support presenting dead battery by ‘Rd’ on CC1/2
Built-in VCONN power switch
Built-in USB Billboard device
Support Constant Current (CC) control output mode
One I2C master/slave port with clock frequency up to 1MHz
In-System Programmable via Type-C CC receptacle (EDI-over-BMC) or EDI-over-I2C protocol
Built-in 8051 with 32KB embedded flash and 1KB SRAM
Power-On-Off-Reset (POFR)
ESD HBM 8KV for CC1/CC2 pins DP/DM pins and EDI_CLK/EDI_DAT pins
Package QFN-32, 5x5x0.85mm
Application:
Monitor, Power Bank, Alt mode video Accessory
CategoryCATEGORY
Power Delivery IC
ENE Technology continues to develop power management and high-speed interface technologies, with a focus on highly integrated USB-C PD 3.1 solutions.
|
Product Series
|
IO338
|
IO368
|
IO358
|
IO352
|
IO362
|
|---|---|---|---|---|---|
| Packaging | |||||
| FLASH ROM | |||||
| SRAM | |||||
|
Introduction
|
USB-C PD Controller
Features: One USB Type-C port configured as DFP, UFP or DRP Built-in precision current source as DFP for 3.0A/1.5A/Default USB power advertisement Support Dead Battery (if RD_EN# pin tied to GND) Built-in VCONN power switch with OVP, OCP and thermal shutdown Three voltage comparators for VBUS OVP and OCP detection Two I2C master/slave ports with clock frequency up to 1MHz In-System Programmable via EDI-over-I2C protocol module Built-in 8051 microprocessor with embedded flash ESD HBM 8KV for CC pins Package QFN-24, 4x4x0.75mm (to be confirmed) Application: Mobile Devices, Car Charger, AC Adaptor, Power Banks |
USB-C PD3.1 和通用快充控制器
特點： 一個 USB Type-C 端口Configuration為 DFP、UFP 或 DRP，支持通用快充 另一個 USB Type-A 端口支持通用快充 支持 USB PD 3.1 PPS 和快速角色切換 (FRS) 作為初始接收端 支持 USB PD 3.1 EPR 兼容 QC4.0/QC3.0/QC2.0 和 BC1.2 兼容通用快充，包括 Apple 2.4A、MTK PE+2.0 等等 支持死Battery 內置 VCONN 電源開關 內置低側電流監控器，用於 USB 過電流保護 (OCP) 內置 8 位 ADC，具有 12 個通道 內置 6 位 DAC x4，具有 32KΩ 輸出阻抗 支持恆流 (CC) 控制輸出模式 內置 8 位 DAC4 用於恆流控制輸出設置 支持 14 位 PWM 通道 x2，用於 Type-A 端口的 DC-DC 調壓 內置 8051，具有 32KB 嵌入式閃存和 1KB SRAM 開機-關機-重置 (POFR) 支持 NTC 熱敏電阻，用於熱警報 ESD HBM 8KV 用於 CC1/CC2 引腳 DP/DM 引腳和 EDI_CLK/EDI_DAT 引腳 工作電流：15mA（估算） 封裝 QFN-24，4x4x0.75mm 應用： AC/DC 充電器、移動電源、替代模式視頻配件 |
USB-C PD3.0 Dual-Port Controller
Features: Two USB Type-C DFP Controller Built-in Rp as DFP for 3.0A/1.5A/Default USB power advertisement Built-in Rd as UFP Built-in Vconn Switch (600mA) Support Dead Battery mode Four voltage comparators Two DACs Two I2C master/slave ports with clock frequency up to 1MHz In-System Programmable via EDI-over-I2C protocol module Built-in 8051 microprocessor with embedded flash Package QFN-24, 4x4x0.75mm Application: USB-C Accessory |
USB PD 3.0 Type-C E-Marker
Features: Integration of two isolation diodes and two Ra No external R, C passive components required on PCB Operating VCONN range: 2.7V~5.5V 8051 + embedded flash architecture facilitating application customization EDI Serial Two-Wire Debugging or In-System Programming Interface Field Programmable via CC interface ESD HBM 8KV Green Package: Lead Free (ROHS compliant) /Halogen Free (IEC 61249-2-21) Package: DFN-8, 2x3x0.75mm Application: USB-C Cable |